BCLYT - WHITE AIR DRY COAT AE146 5294
- MSDS: BCLYT
- Manufacturer: RED SPOT PAINT AND VARNISH CO INC
- Product Name: WHITE AIR DRY COAT AE146 5294
- National Stock Number: 8010-00N006107
Product Identification
Product ID:WHITE AIR DRY COAT AE146 5294
MSDS Date:01/01/1985
FSC:8010
NIIN:00N006107
MSDS Number: BCLYT
Responsible Party
EVANSVILLE, IN 47703
US
Cage: EO503
Contractor
Telephone: 800-424-9300(CHEMTREC)
Cage: 16214
Ingredients
2-BUTOXYETHANOL
CAS: 111-76-2
RTECS: KJ8575000
Fraction By Weight: <3%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: <3%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHYL ISOBUTYL KETONE (SARA III)
CAS: 108-10-1
RTECS: SA9275000
Fraction By Weight: 40%
OSHA PEL 100 PPM/75 STEL
ACGIH TLV: 50 PPM/75 STEL; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
XYLENES (O-,M-,P- ISOMERS) (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 56%
OSHA PEL 100 PPM/150 STEL
ACGIH TLV: 100 PPM/150STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
Effects of Overexposure:EYE/SKIN: IRRITATION. VAPORS: ANESTHETIC IRRIT
OF RESP TRACT,ACUTE NERVOUS SYSTEM DEPRESSION,COMA.
First Aid
First Aid:EYE: FLUSH WITH WATER 15 MINUTES,GET MEDICAL ATTENTION. SKIN:
WASH WITH WATER,REMOVE CONTAMINATED CLOTHING,CONSULT PHYSICIAN.
INHALATION: REMOVE TO FRESH AIR,GIVE ARTIF RESP IF NEEDED,CONSULT A
PHYSIC IAN.
Fire Fighting
Flash Point:61F/16C (TCC)
Lower Limits:1.2
Extinguishing Media:CARBON DIOXIDE,DRY CHEMICAL,FOAM
Fire Fighting Procedures:SELF-CONT BREATH APP,WATER SPRAY TO COOL
EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.
Accidental Release
Spill Release Procedures:SECURE SOURCES OF IGNITION,VENTILATE
AREA,AVOID BREATHING VAPORS. REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F/48C. GROUND
CONTAINER WHEN POURING,AVOID FREE FALL IN EXCESS OF A FEW INCHES.
DO NOT TAKE INTERNALLY.
Other Precautions:DO NOT FLAME CUT,WELD OR BRAZE WITHOUT NIOSH/MSHA
APPROVED RSP DEVCE AND/OR APPROPRIATE VENTILATION. READ WARNING
LABEL.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED RESP DEVICE IN ACCORD WITH
EXPOSURE OF CONCERN.
Ventilation:LOCAL/MECHANICAL TO MAINTAIN BELOW TLV
Protective Gloves:REQUIRED
Eye Protection:SPLASH PROOF GOGGLES
Other Protective Equipment:AS NEEDED TO PREVENT SKIN CONTACT.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:116C/241F
Vapor Density:>1
Evaporation Rate & Reference:<1 (ETHER)
Percent Volatiles by Volume:77.7
Stability
Stability Indicator/Materials to Avoid:YES
Disposal
Waste Disposal Methods:COMPLY WITH LOCAL, STATE AND FEDERAL
REGULATIONS. DO NOT INCINERATE CLOSED CONTAINERS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.